I wanted to give me an electric spark ignition tinker ^^
For I have measured after now transformer from a small tube television there and taken a Flyback pins, what belongs together.
Now, I just don't testing jobs what pins I should use.
Did a quick picture with paint :)
Image
Say we are the pins counterclockwise by 1 - 10 labeled, then I got the following result:
1.2,8 and 10 belong together
proverbs and 9 belong together
Then I measured the resistance.
No matter what combination of 1,2,8 and 10, the resistance is always 1 ohm
It is different with the other pins:
Between 4 and 6 are about 9.5 ohms
Between 4 and 7, there are ca. 12 ohm
Between 4 and 9, there are ca 13 ohms
Between 6 and 7 there are ca 3 ohm
Between 6 and 9, there are ca 4 ohm
Between 7 and 9, there are ca. 2 ohm
The mass of the HV Test equipment rentals is both pin 3 and pin 5 (but there is probably also a difference, going from the results not smart ^^)
So I wonder what coil I should work so I am also what ordinary end.
Am grateful for any help.
